Posted on

Broken Timing Belt – Is My Engine Dead?

The news from the mechanic was grim: our friend’s car had probably suffered a broken timing belt. The car quit while driving down the highway. One minute they were cruising along, then the next minute the engine had completely stopped and they were coasting (thank goodness it was an automatic transmission). After wrestling the now (un)powered steering car over to the curb a futile attempt was made to restart the vehicle. Eventually the battery was drained and a tow truck was called. Bummer.

To be fair, our friend only asked his mechanic for a quick diagnosis, which the mechanic did for free. Peeking behind the timing belt cover confirmed the worst: a broken timing belt. Now things were getting serious, which meant it was “Ask My Car Guys” time. After getting the year/make/model and engine specs of the car I quickly found that my friend may have been lucky, as this was a non-interference engine. But what does that mean?

In simplest terms the interference part has to do with whether or not the piston will strike a open valve as it reaches the top of the cylinder. A non-interference engine means that even if a valve is wide open as the piston goes by, it won’t touch it. Now for the bad part. An interference engine means that if a valve is open as the piston goes by, it will at minimum bend the valve, but at worst it will snap the valve head off and proceed to bang everything in the cylinder to pieces. Kind of like making egg salad with a jackhammer.

My friend’s car had a non-interference engine. When his timing belt broke the valves of the engine stopped opening and closing in sync with the movement of the pistons. The valves simply stopped wherever they were when the belt broke, making internal combustion impossible. But even as the engine coasted to a stop the pistons never touched the valves. The mechanic was able to install a new timing belt after rotating the camshaft pulley to its correct position (which had fallen out of sync after the old belt broke). With a new belt in place and the pulleys timed correctly the engine started up happily.

This time the story had a happy ending, but for many engines out there a snapped timing belt can mean complete disaster. Damage can range from a few bent valves (requires a new or rebuilt cylinder head) to complete destruction of the engine (pistons, cylinders, cylinder heads and more). Repairs costs can range between several hundred to several thousand dollars. Even just replacing a single cylinder head can incur a few hundred dollars in shop labor costs plus the cost of parts.

The key is preventative maintenance. Each manufacturer has a specific replacement interval for the timing belt (usually in miles). Always check your owners manual for specifics. It you are unsure of the number of miles on your current timing belt, it may be worth having it replaced regardless. This is especially important if you have an interference engine (see footnote), as a few hundred dollars in preventative maintenance may save you thousands later on, plus it buys you peace of mind knowing there isn’t a ticking time bomb under the hood.

Image courtesy of Flickr.


NOTE: So how do you know if you have an interference or non-interference engine? This site has one of the best lists I’ve seen. You will need to know your engine manufacturer and size.

One thought on “Broken Timing Belt – Is My Engine Dead?

  1. My friend was not so lucky. When his timing belt broke it did some damage to his cylinder heads. He was able to get it fixed, but his car was never quite the same and didn’t last much longer, it was an older car and damage from the timing belt breaking was the last straw. So, I second making sure you replace the timing belt as needed before it breaks.

Leave a Reply

Your email address will not be published. Required fields are marked *